Northern UTA220/UTA220k - Manual (Page 54)

5-12
UTA220/UTA220k
LCD Operation
VIEW
PRODUCT
INFORMATION b-s c p b = board number
s = software revision
c = checksum
p = PASS or FAIL
VIEW
D I A G N O S T I C
CODE? D I A G N O S T I C
CODE =c. c = diagnostic code value to aid
in field support.
CLEAR
D I A G N O S T I C
CODE VALUE? CLEARING
D I A G N O S T I C
CODE Resets diagnostic code value to
0.
Notes:
1. The next screen will be either the ENTER NUMBER TO DIAL? screen or the HANGUP? screen,
depending on the call status of the port. If the call status is IDLE, ENTER NUMBER TO DIAL?
is displayed; otherwise, HANGUP? is displayed.
2. The LCD advances to the call status screen.
3. VIEW/CHANGE STORED TEL NUM? screen is the last submenu under DIAL/HANGUP OPTS.
4. Pressing YES or NO advances the LCD to the ENTER NUMBER TO DIAL? or the HANGUP?
screen (depending on the current status: IDLE: the LCD advances to DIAL?; otherwise the LCD
advances to HANGUP?).
5. Answering YES to DIAGNOSTIC OPTIONS? advances the LCD to the PORT TEST? screen if
a port test is in progress. Otherwise, the LCD advances to the GLOBAL TEST? screen.
6. Answering YES to GLOBAL TEST?, advances the LCD to the test status screen if a global test
is currently in progress. Otherwise, the LCD advances to 2B+D LOOPBACK?
7. Answering YES advances the LCD to the global test status screen.
8. Pressing YES or NO advances the LCD to the END TEST? screen.
9. Answering YES advances the LCD to the test status screen if a port test is currently in progress.
Otherwise, the LCD advances to the CURRENT PORT screen.
10. Answering YES advances the LCD to the global test status screen.
11. Pressing YES or NO advances the LCD to the END TEST? screen
Table 5-1. Menu Option Summary (Continued)
Main Level Level 1 Level 2 Level 3 Level 4 Description
Navigation button
directions:
YES NO HOME