Northern UTA220/UTA220k - Manual (Page 143)

UTA220/UTA220k
C-9
AT Command Set
Session Parameters: X.25
%B0= Receive Window Size Range: 0-8 default (0)
%B1= Transmit Window Size Range: 0-8 default (0)
%B2= Receive Packet Size Range: 0, 7-10 default (0)
%B3= Transmit Packet Size Range: 0, 7-10 default (0)
%B5= Permanent Virtual Circuit
(PVC) 0 Non-PVC <default>
1 PVC
%B6= Logical Channel Number Range: 0-255 default (1)
%B7= D-bit Confirmation 0 Disabled <default>
1 Enabled
%B8= Closed User Group (CUG)
Option 0 No CUG selected <default>
1 Basic CUG
2 CUG with outgoing access
3 Bilateral CUG
%B9= Closed User Group Name Range: 0-4 digits default (null string)
%B10= Reverse Charging Option 0 Normal Call Charging
<default>
1
Reverse Call Charging
%B11= Receive Through Input
Class 0 Use network default
<default>
1
Reserved
2 Reserved
3 75
4 110
5 300
6 600
7 1200
8 2400
9 4800
10 9600
11 19200
12 48000
13 64000
14 Reserved
15 Reserved
Table C-1: UTA 220 AT Command Set (Continued)
Command Description Value
*Note: "by port" indicates that these switch parameters are associated with a
particular port. However, this does not exclude ports from sharing the same
SPID or TEI.+