Netopia 6.3 User Manual

Page 112

Advertising
background image

112

Appendix A

SHELL Commands

Releases the DHCP lease the Gateway is currently using to acquire the IP settings
for its WAN (Ethernet B) port.

Releases the DHCP lease the Cayman 3220-H is currently using to acquire the IP
settings for the specified DSL port. The

vcc-id

identifier is a letter in the rang B-

I. Enter the

reset dhcp client release

without the variable to see the

letter assigned to each virtual circuit.

Renews the DHCP lease the Gateway is currently using to acquire the IP settings
of its WAN (Ethernet B) port.

Releases the DHCP lease the Cayman 3220-H is currently using to acquire the IP
settings for the specified DSL port. The

vcc-id

identifier is a letter in the rang B-

I. Enter the

reset dhcp client release

without the variable to see the

letter assigned to each virtual circuit.

Clears the DHCP lease table in the Cayman Gateway.

Resets any open DSL connection.

Resets Ethernet statistics to zero

Clears all entries in the host name table. Thereafter, when PCs configured as
DHCP clients use the Gateway, new entries will be rebuilt. DHCP serving must be
enabled.

Clears the IPMap table (NAT).

Rewinds the diagnostic log display to the top of the existing Cayman Gateway
diagnostic log. The reset log command does not clear the diagnostic log. The
next show log command will display information from the beginning of the log
file.

Resets the point-to-point connection over the WAN interface. When you issue a
reset ppp

command, the Cayman 2E-H closes any PPP session (including PPP

over Ethernet).

ENET

reset dhcp client release { B | all }

DSL

reset dhcp client release [

vcc-id

]

ENET

reset dhcp client renew { B | all }

DSL

reset dhcp client renew [

vcc-id

]

BOTH

reset dhcp server

DSL

reset dsl

BOTH

reset enet

BOTH

reset hosts

BOTH

reset ipmap

BOTH

reset log

ENET

reset ppp [enet-B]

Advertising