Netopia 6.3 - Manual (Page 56)

56
Section 4 Configure
Configure a Default Server
This feature allows you to direct unsolicited or non-specific traffic to a des-
ignated LAN station. With NAT “On” in the Gateway, these packets nor-
mally would be discarded.
For instance, this could be application traffic where you don’t know (in
advance) the port or protocol that will be utilized. Some game applications
fit this profile.
Use the following steps to setup a NAT default server to receive this infor-
mation:
Step 1 Select the Configure toolbar button, then Advanced , then the Default Server link.
Step 2 Check the Enable Default Server checkbox. The NAT Server IP Address field
appears.
Step 3 Determine the IP address of the LAN computer you have chosen to receive
the unexpected or unknown traffic. Enter this address in the NAT Server IP
Address field.
Step 4 Click the Submit button.
Step 5 Click the Alert button.
Step 6 Click the Save and Restart link to confirm.
NAT Default Server capability is not available over SafeHarbour IPsec.