Netopia 6.3 - Manual (Page 63)

63
Section 4 Configure
Link Internal Servers
Response
Description
Your Gateway ships with an embedded Web server and support for a
Telnet session, to allow ease of use for configuration and maintenance.
The default ports of 80 for HTTP and 23 for Telnet may be reassigned.
This is necessary if a pinhole is created to support applications using
port 80 or 23. See
“Pinholes” on page 46 for more information on Pin-
hole configuration.
Web (HTTP) Server Port:
To reassign the port number used to access
the Cayman embedded Web server, change this value to a value greater
than 1024. When you next access the embedded Cayman Web server,
append the IP address with <port number>, (e.g. Point your browser to
http://210.219.41.20:8080
)
Telnet Server Port: To reassign the port number used to access your
Cayman embedded Telnet server, change this value to a value greater
than 1024. When you next access the Cayman embedded Telnet server,
append the IP address with <port number>, (e.g. telnet
210.219.41.20:2323
)