Netopia 6.3 - Manual (Page 115)

115
Appendix A SHELL Commands
Displays memory usage information for your Cayman Gateway. If you include the
optional all
argument, your Cayman Gateway will display a more detailed set of
memory statistics.
Displays information about open PPP links. You can display a subset of the PPP
statistics by including an optional stats, lcp, ipcp
, or lastconnect argu-
ment for the show ppp command.
Displays information about open PPP links. You can display a subset of the PPP
statistics by including an optional stats, lcp, ipcp
, or lastconnect argu-
ment for the show ppp command. The optional vccn argument lets you
specify the virtual circuit for which you want statistics.
Displays status information for each PPP socket, such as the socket state, service
names, and host ID values.
Displays up to 100 security-related events stored in the log.
Displays the current status of a Cayman Gateway, the device's hardware and soft-
ware revision levels, a summary of errors encountered, and the length of time the
Cayman Gateway has been running since it was last restarted. Identical to the
status
command.
Without the all parameter displays the number of concurrent WAN Users and the
total number allowed. With the all parameter specified, displays information
about each connected WAN User, including its IP address and idle time before
automatic disconnect. This function is only available if the number of WAN Users
is restricted and NAT is on.
Displays status and statistics information for the wireless interface on the Gate-
way.
Opens a PPP link (typically PPP over Ethernet).
BOTH show memory [all]
ENET show ppp [{ stats | lcp | ipcp | lastconnect }]
DSL show ppp [{ stats | lcp | ipcp | lastconnect }] [vccn]
BOTH show pppoe
BOTH show security-log
BOTH show status
BOTH show wan-users [all]
BOTH show wireless
ENET start ppp