Netopia 6.3 - Manual (Page 62)

62
Section 4 Configure
Link System
Response
Description
The System Name defaults to your Gateway's factory identifier com-
bined with its serial number. Some cable-oriented Service Providers use
the System Name as an important identification and support parame-
ter. If your Gateway is part of this type of network, do NOT alter the
System Name unless specifically instructed by your Service Provider.
The System Name can be 1-63 characters long; it can include embed-
ded spaces and special characters.
The Log Message Level alters the severity at which messages are col-
lected in the Gateway's system log. Do not alter this field unless
instructed by your Support representative.