Netopia 6.3 - Manual (Page 49)

49
Section 4 Configure
Pinhole Configuration Procedure
Use the following steps:
Step 1 From the Configure toolbar button -> Advanced link, select the Internal
Servers link.
Since Port Forwarding is required for this example, the Cayman embedded Web
server is configured first.
To pass Web traffic through to your LAN station(s), select a Web (HTTP)
Port number that is greater than 1024. In this example, you choose 8100.
Step 2 Type 8100 in the Web (HTTP) Server Port text box.
Step 3
Step 4 Click the Submit button.
Step 5 Click Advanced . Select the Pinholes link to go to the Pinhole page.
The two text boxes, Web (HTTP) Server Port and Telnet Sever Port, on this
page refer to the port numbers of the Cayman Gateway’s embedded admin-
istration ports
.