Netopia 6.3 - Manual (Page 37)

37
Section 4 Configure
Setup Your Gateway using a DHCP Connection
The Other Quickstart Options page allows you to change the System
Name or your Gateway’s Ethernet MAC address.
System Name is your Gateway’s factory identifier combined with its serial
number. By default, this identifier is automatically captured for this field.
Link Configure -> Quickstart
Response
Comment
This example screen is for a DHCP Quickstart configuration.
Your Service Provider will instruct you as to whether or not the Other
Quickstart Options need to be configured. If they are not needed, you
should be ready to access the Internet.
If required, click the
Advanced link to access the Other Quickstart
Options page.