NetComm NP2624M - Manual (Page 103)

NP2624M User Guide 103
YML827 Rev1
2. Status: Press <Space> key to choose Fu / Fa / Au / No authorization status.
3. Press Ctrl+A to go back to the action line menu.
4. Select <Save> to save all configured values.
Note: Fu: Force the specific port to be unauthorized.
Fa: Force the specific port to be authorized.
Au: The state of the specific port determined by the outcome of the
authentication.
No: The specific port didn’t support 802.1x function.
4.3.5.4. 802.1x Miscellaneous Configuration
1. Press <Edit>.
2. Quiet Period: Used to define periods of time during which it will not attempt to acquire a
supplicant (Default time is 60 seconds).
3. Tx Period: Used to determine when an EAPOL PDU is to be transmitted (Default value
is 30 seconds).
4. Supplicant Timeout: Used to determine timeout conditions in the exchanges between the
supplicant and authentication server (Default value is 30 seconds).
5. Server Timeout: Used to determine timeout conditions in the exchanges between the
authenticator and authentication server (Default value is 30 seconds).
6. ReAuthMax: Used to determine the number of re-authentication attempts that are
permitted before the specific port becomes unauthorized (Default value is 2 times).
7. Reauth Period: Used to determine a nonzero number of seconds between periodic re-
authentication of the supplications (Default value is 3600 seconds).
8. Press Ctrl+A to go back to the action line menu.
9. Press <Save> to save configured values.