NetComm NP2624M User Manual

Page 22

Advertising
background image

22

NP2624M User Guide

YML827 Rev1

Egress:

Type the port effective egress rate. The valid range is

0~1000. The unit is 100K.

0: disable rate control.

1 ~ 1000: valid rate value.

Priority:

Enable or disable the port priority function. There

are two priorities (high or low) provided if port

priority is enabled.

Security:

A port in security mode will be “locked” without

permission of address learning. Only the incoming

packets with SMAC already existing in the address

table can be forwarded normally. Users can disable

the port from learning any new MAC addresses, then

use the static MAC addresses screen to define a list

of MAC addresses that can use the secure port.

Enter the settings, then click Apply button to change on this page.

Advertising