NetComm NP2624M User Manual
Page 19
NP2624M User Guide
19
YML827 Rev1
Priority Queue Service settings:
First Come, First Serve:
The sequence of packets sent is depending on the
arrival order.
All High before Low:
The high priority packets are sent before the low
priority packets.
WRR:
(Weighted Round Robin) Select the preference given
to packets in the switch’s high-priority queue. These
options represent the number of high priority packets
sent before one low priority packet is sent. For
example, 5 High:2 Low means that the switch sends
5 high-priority packets before sending 2 low- priority
packets.
QOS Policy:
High Priority Levels: 0~7 priority level can be
mapped to a high or low queue.
2.5.2.2 Miscellaneous Configuration
Collisions Retry Forever:
Disable – In half duplex, the collision-retry
maximum is 48 times and packet will be dropped if
collisions still happen.
Enable – In half duplex, there is no collision-retry
limit. Retry will be attempted indefinitely.
Hash Algorithm:
Choose algorithms, CRC-Hash or DirectMap, to
maintain MAC address table.
IFG Compensation:
Enable or disable inter-frame gap (IFG)
compensation.
802.1x Protocol:
Enable or disable 802.1x protocol.