NetComm NP2624M - Manual (Page 36)

36 NP2624M User Guide
YML827 Rev1
3. You can also set new values for RSTP parameters, then click the Apply button to modify
Parameter Description
Priority You can change the priority value. A value is used
to identify the root bridge. The bridge with lowest
value has the highest priority and is selected as the
root. Enter a number 1 through 65535.
Max Age You can change the Max Age value. The number of
second bridge waits without receiving Spanning-Tree
Protocol configuration messages before attempting a
reconfiguration. Enter a number 6 through 40.
Hello Time You can change the Hello time value. The number
of seconds among the transmission of Spanning-Tree
Protocol configuration messages. Enter a number 1
through 10.
Forward Delay Time You can change the forward delay time. The number
of seconds a port waits before changing from its
Spanning-Tree Protocol learning and listening states
to the forwarding state. Enter a number 4 through 30.