NetComm NP2624M User Manual

Page 33

Advertising
background image

NP2624M User Guide

33

YML827 Rev1

3. Type a VID (between 2-4094). The default is 1.
4. Choose the protocol type.
The NP2624M supports 802.1v with the implementation of Port-and-Protocol-based

VLAN classification. Users can combine the field “Protocol VLAN” and the field of the

port number to form a new VLAN group.

NOTE:

IEEE 802.1v allows a user to classify the packets through an untagged
port. There are two possible strategies of the 802.1v support: Port-
based VLAN and Port-and-Protocol-based VLAN. Both are supported
in the NP2624M. Users set the VID to mark the packet from the
untagged port and then the packet can be scheduled by the way of
the IEEE 802.1q.

5. From the Available ports box, select ports to add to the switch and click “Add >>”. If

the trunk groups exist, they will be displayed here (eg: TRK1, TRK2…) and you can

configure it as a member of the VLAN if necessary.

6. Click Next. The following page will be displayed.

Advertising