NetComm NP2624M - Manual (Page 59)

NP2624M User Guide 59
YML827 Rev1
3.2 TFTP Firmware update
We provide the TFTP client to update firmware from Ethernet. The user has to first install TFTP
server on their PC and place the image in the download folder.
1. Press “3” to start TFTP update firmware.
2. Enter the Switch IP address and press “Enter” to accept default value.
3. Enter the TFTP Server IP address and press “Enter” to accept default value.
4. Enter the File name to download. Press “Enter” to accept default value and the TFTP
download will begin and the firmware will be updated.
3.3 Set IP Address
A shortcut to set switch IP address and gateway before switch system initialization has also been
provided. This saves time as the switch IP can be changed without the need to wait for the system to
boot up and reconfigure.
1. Press “4” to start IP setup.
2. Enter the Switch IP address. Press “Enter” to accept the default value.
3. Enter the Mask. Press “Enter” to accept the default value.
4. Enter the Gateway IP address. Press “Enter” to accept the default value.