NetComm NP2624M - Manual (Page 58)

58 NP2624M User Guide
YML827 Rev1
3.1 1K X modem Firmware update
We provide the 1k X modem to update firmware from RS232. 1K X modem only works in
57600bps mode. So you must change baud rate to 57600bps to download firmware.
1. Select “2” to start 1K X modem firmware update.
2. When “CCCC…” is displaying on console, select Transfer /Send File.
3. Select the 1K Xmodem in the Protocol item, and browse for the image for updating.
Press the Send button.
4. Start downloading the image file.
5. After the firmware has been downloaded, the switch will then automatically update it
and then the switch will reboot.