NetComm NP2624M - Manual (Page 87)

NP2624M User Guide 87
YML827 Rev1
4.2.8.2. Filtering MAC Address
MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the
destination addresses.
In this page users can add /modify /delete a MAC address filter.
Add filter MAC address
1. Press <Add> > <Edit> key to add a MAC address filter.
2. MAC Address: Type the MAC address to filter.
3. Vlan ID: If tag-based (802.1Q) VLAN are set up on the switch, type the VID to
associate with the MAC address.
4. Press Ctrl+A to go back to the action menu line, and then select <Save> to save all
configured values.