NetComm NP2624M User Manual
Page 25
Advertising
NP2624M User Guide
25
YML827 Rev1
2.5.5.3 State Activity
Active (select):
The port automatically sends LACP protocol packets.
N/A (no select):
The port does not automatically send LACP protocol
packets, and responds only if it receives LACP
protocol packets from the opposite device.
1. A link that has either two active LACP ports or one active port can perform dynamic
LACP trunking. A link has two N/A LACP ports will not perform dynamic LACP
trunking because both ports are waiting for an LACP protocol packet from the opposite
device.
2. If you are active LACP’s actor, when you select trunking port, the active status will be
created automatically.
Advertising