NetComm NP2624M - Manual (Page 99)

NP2624M User Guide 99
YML827 Rev1
4. LACP Work Port Num: Defines the maximum number of ports that can be aggregated
at the same time. If local static trunk group, the number must be the same as group
member ports.
NOTE: Before changing settings on this page, you have to set trunk group
on the page of Trunk Configuration first.
4.3.4.2. State Activity
1. Select <Edit>.
2. Press the Space key to choose the item.
Active: The port automatically sends LACP protocol packets.
Passive: The port does not automatically send LACP protocol packets, and responds
only if it receives LACP protocol packets from the opposite device.
3. Press Ctrl+A go back action menu line.
4. Select <Save> to save configured values.
NOTE: If a user sets LACP mode in the trunk group, all of the member ports
of this trunk group will set “Active” automatic.