NetComm NP2624M User Manual

Page 117

Advertising
background image

NP2624M User Guide

117

YML827 Rev1

5.4. “Single IP - Stacking mode” application used with switch

This switch provides traditional stacking mode to stack a maximum of 16 switches by cascading

their Gigabit ports. This feature helps network administrators use one switch assigned as the master

to manage the other stacked switches through the browser. That is, the master can bring a “global

view” showing all stacked devices to network administrator as long as he/she has access to the

master switch by using its IP (this IP should be public for remote access through the internet). This

will easily let the network administrator know the group settings (e.g. tag-based VLAN groups)

and link status among all stacked units. A typical arrangement of network connection of “Single IP

– Stacking mode” is shown below:

Typical connections for switch management by stacking

The significant characteristics of this switch are:

1. No redundant hardware required:
Unlike special requirement of connecting cable among “hardware stacking” switches,

this switch provides the least demand as a Gigabit module to build up a stacking

set. The Gigabit module give the best performance for inter-communication between

stacking switches and the administrator can spare one port of Gigabit module in the top

switch or the bottom one in the stack for flexible usage.

2. Well integrated UI to view status of stacking switches:
An user-friendly Web UI provides the user a total view of the port link status and VLAN

group settings for all stacked switches at a glance.

Advertising