NetComm NP2624M User Manual
Page 68
Advertising
68
NP2624M User Guide
YML827 Rev1
4.2.3.2. Create a VLAN Group
Create Port-Based VLAN
Create a port-based VLAN and add member/nonmember ports to it.
1. Select <Edit>.
2. VLAN Name: Type a name for the new VLAN.
3. Grp ID: Type the VLAN group ID. The group ID range is 1~4094.
4. Member: Press <Space> key to choose VLAN member. There are two types to select:
a. Member: the port is member port.
b. No: the port is NOT member port.
5. Press Ctrl+A go back action menu line.
6. Select <Save> to save all configure value.
NOTE:
If trunk groups exist, they will be displayed (eg: TRK1, TRK2…) after
port26, and you can configure if necessary.
Advertising