Timer interrupt clear register – National Instruments Low-Cost Multifunction I/O Board for ISA Lab-PC+ User Manual
Page 144
Advertising
Register Map and Descriptions
Appendix D
Lab-PC+ User Manual
D-28
© National Instruments Corporation
Timer Interrupt Clear Register
Writing to the Timer Interrupt Clear Register clears the interrupt request asserted when a low
pulse is detected on the Counter A2 output or on EXTUPDATE* line.
Address:
Base address + 0C (hex)
Type:
Write-only
Word Size:
8-bit
Bit Map:
Not applicable, no bits used.
Advertising