Lab-pc+ hardware and software configuration form, National instruments products, Other products – National Instruments Low-Cost Multifunction I/O Board for ISA Lab-PC+ User Manual
Page 193
Lab-PC+ Hardware and Software
Configuration Form
Record the settings and revisions of your hardware and software on the line to the right of each item. Complete a
new copy of this form each time you revise your software or hardware configuration, and use this form as a
reference for your current configuration. Completing this form accurately before contacting National Instruments
for technical support helps our applications engineers answer your questions more efficiently.
National Instruments Products
•
Base I/O Address of Lab-PC+
_____________________________________________
(Factory Setting–Hex 260)
•
DMA Channel of Lab-PC+
_____________________________________________
(Factory Setting–3)
•
Interrupt Level of Lab-PC+
_____________________________________________
(Factory Setting–IRQ5)
•
Analog Output Channel 0 Configuration
_____________________________________________
(Factory Setting–Bipolar, W1, A-B)
•
Analog Output Channel 1 Configuration
_____________________________________________
(Factory Setting–Bipolar, W2, A-B)
•
Analog Input Configuration
_____________________________________________
(Factory Setting–Bipolar, W3, A-B)
•
NI-DAQ, LabVIEW, or LabWindows/CVI Version
_____________________________________________
Other Products
•
Microprocessor
_____________________________________________
•
Clock Frequency
_____________________________________________
•
Computer Make and Model
_____________________________________________
•
Type of Video Board Installed
_____________________________________________
•
Operating System and Version
_____________________________________________
•
Programming Language
_____________________________________________
•
Programming Language Version
_____________________________________________
•
Other Boards in System
_____________________________________________
•
Base I/O Address of Other Boards
_____________________________________________
•
DMA Channels of Other Boards
_____________________________________________
•
Interrupt Level of Other Boards
_____________________________________________