Nortech Systems Adept RS-232/TERM - Manual (Page 25)

Controller Installation
Adept SmartController User’s Guide, Rev. E 25
Rack Mounting the SmartController
To rack mount the SmartController in a standard 19-inch equipment rack, install the
optional mounting brackets on the side of the controller, as shown in
Figure 2-1 . These
brackets must be ordered separately, they do not come with the SmartController.
Figure 2-1. Rack Mounting the SmartController
2X 25.0
88.1
3.6
TYP. 14.2
R 3.6
3X M3 x 6MM
BOTH SIDES
3.8
19.1
2X 40356-00004
462.0
21.8
44.4
482.8
190.0