Figure 4-4, Table 4-3, Adept 10-meter camera cable pin assignments – Nortech Systems Adept RS-232/TERM User Manual
Page 77: For the pinout
Camera Cable Pin and Signal Information
Adept SmartController User’s Guide, Rev. E
77
Figure 4-4. Pin Locations for Camera Cable Connector (12-Pin Hirose Male)
Table 4-3. Adept 10-Meter Camera Cable Pin Assignments
Pin # at
controller
end (male)
Function
Notes
Wire Color
(typical)
Pin # at
camera end,
(female)
1
Power return
gray
1
2
+12V power
to camera
yellow
2
3
Shield (video)
red-shield
3
4
Video
from camera
red-signal
4
5
Shield (Hd)
orange-
shield
5
6
Hd (horizontal drive)
to camera
orange-
signal
6
7
Vd (vertical drive)
to camera
black-signal
7
8
Shield (Clock)
from camera (cam. 1
& 2 only)
white-shield
8
9
Pixel clock
from camera (cam. 1
& 2 only)
white-signal
9
10
not used
reserved
brown
10
11
not used
reserved
blue
11
12
Shield (Vd)
black-shield
12
•
Connector at controller end: 12-Pin Hirose Male, HR10A-10P-12P, with ground terminal lug
(shield). See
for pin locations.
•
Connector at camera end: 12-Pin Hirose Female, HR10A-10P-12S.
•
Cable specifications: 12 conductors, including 4 coax pairs, 4 discrete conductors, and overall
shield. At each end the shield is clamped to connector body.
9
10
12
11
8
7
6
5
4
3
2
1
Black
Brown
Gray
Blue
Yellow
White
Orange
Red
Overall
Braided Shield
Wire colors
may vary