Nortech Systems Adept RS-232/TERM - Manual (Page 80)

Chapter 4 - AdeptVision sAVI Option
80 Adept SmartController User’s Guide, Rev. E
AVI 42 CAM4 4 Video
AVI 38 CAM4 5 Shield (Hd)
AVI 36 CAM4 6 Hd (horizontal drive)
AVI 37 CAM4 7 Vd (vertical drive)
-- 38 CAM4 8 not connected
-- 22 CAM4 9 not connected
-- -- CAM4 10 not connected
-- -- CAM4 11 not connected
AVI 17 CAM4 12 Shield (Vd)
-- -- Str/Pwr 1 User +12 V to cameras
-- -- Str/Pwr 2 User power return
AVI 26 Str/Pwr 3 Strobe 1
AVI 11 Str/Pwr 4 Strobe return
AVI 39 Str/Pwr 5 Strobe 2
AVI 11 Str/Pwr 6 Reserved
AVI 40 Str/Pwr 7 Reserved
AVI 11 Str/Pwr 8 Reserved
AVI -- Str/Pwr 9 Shield (chassis ground)
Note that this cable provides user-supplied 12VDC to the cameras obtained
from the Strobe and Power connector.
Table 4-5. Four-Camera Breakout Cable Pin Assignments (Continued)
From: Pin To: Pin Function