Nortech Systems Adept RS-232/TERM - Manual (Page 93)

Adept SmartController User’s Guide, Rev. E 93
sDIO Module
A
The sDIO expansion module provides 32 optically isolated digital inputs and 32 optically
isolated outputs and also includes an IEEE 1394 interface.
Figure A-1. sDIO Module
A.1 Mounting the sDIO
The following mounting options are available for the sDIO:
• Rack mounting
• Panel mounting
• Table mounting
In addition, the SmartController and sDIO can be stack mounted on top of each other. See
the sections below for information on mounting the sDIO.
NOTE: To maintain compliance with EN 60204 in European installations,
the mounting of the controller and all terminations at the controller must
be performed in accordance with this standard.