Netopia Firmware 4000-Series User Manual
Page 146
5-16 Firmware User Guide
If you return to the IP Profile Parameters screen, two new fields are displayed:
■
Display/Change Network allows you to make changes to existing network configurations you have made. If
you select Display/Change Network, a list of your configured networks displays.
■
Scroll down and up with the arrow keys to select the one you want to change, and press Return. You will be
returned to the Network Configuration screen where you can make any required changes.
■
If you select Delete Network in the IP Profile Parameters screen, the same scrolling list will display. When
you select one of the networks and press Return, a warning screen will ask you to confirm your choice:
IP Profile Parameters
Remote Tunnel Endpoint: 0.0.0.0
Add Network...
Display/Change Network...
Delete Network...
Address Translation Enabled: No
Filter Set... <<None>>
Remove Filter Set
Advanced IP Profile Options...
COMMIT CANCEL
Enter the IP Address or hostname of the remote tunnel endpoint.
Display/Change Network Configuration
--------------Local-Members-------------------------Remote-Members--------------
Net #---Type----Start-Address---Size----------Type----Start-Address---Size------
----------------------------------SCROLL UP-----------------------------------
1 SUBNET 192.168.2.1 /24 SUBNET 192.168.1.0 /24
2 SUBNET 10.0.1.1 /8 SUBNET 10.0.0.1 /8
3 HOST 163.176.91.101 - HOST 163.176.91.100 -
4 RANGE 163.176.30.222 21 RANGE 163.176.91.100 100
---------------------------------SCROLL DOWN----------------------------------