Nested ip subnets – Netopia Firmware 4000-Series User Manual
Page 303
Understanding IP Addressing B-11
Nested IP Subnets
Under cer tain circumstances, you may want to create remote subnets from the limited number of IP addresses
issued by your ISP or other authority. You can do this using connection profiles. These subnets can be nested
within the range of IP addresses available to your network.
For example, suppose that you obtain the Class C network address a.b.c.0 to be distributed among three
networks. This network address can be used on your main network, while por tions of it can be subnetted to the
two remaining networks.
Note:
The IP address a.b.c.0 has letters in place of the first three numbers to generalize it for this example.
The figure shows a possible network configuration following this scheme. The main network is set up with the
Class C address a.b.c.0, and contains Router A (which could be a Router), a Router, and a number of other
hosts. Router A maintains a link to the Internet and can be used as the default gateway.