Netopia Firmware 4000-Series - Manual (Page 23)

WAN and System Configuration 2-5
IDSL Line Configuration screen
The IDSL Line Configuration screen is shown below:
■ For IDSL lines, the Data Rate (kbps) pull-down menu offers 64 (B1), 64 (B2), 128 (B1+B2), or 144
(2B+D).
■ The Data Link Encapsulation pull-down menu offers PPP, HDLC, or Frame Relay.
■ If you are using Frame Relay, a PPP over Frame Relay Enabled option appears and allows you to tog-
gle it either On or Off.
■ If you enable PPP over Frame Relay, the DLCI and LMI fields appear.
The DLCI field is editable; the default is 16.
The LMI pull-down menu offers the choices None, ANSI (Annex D), CCITT (Annex A), or LMI.
IDSL Line Configuration
Line Type... IDSL
Data Rate (kbps)... 144 (2B+D)
Data Link Encapsulation... PPP
Return/Enter to select <among/between> ...
Enter information supplied to you by your ISDN phone company.