Netopia Firmware 4000-Series - Manual (Page 64)

2-46 Firmware User Guide
Logging
You can configure a UNIX-compatible syslog client to repor t a number of subsets of the events entered in the
router’s WAN Event Histor y. See
“WAN Event Histor y” on page 9-5 .
Select Logging from the System Configuration menu.
The Logging Configuration screen appears.
By default, all events are logged in the event histor y.
■ By toggling each event descriptor to either Yes or No, you can determine which ones are logged and which
are ignored.
■ You can enable or disable the syslog client dynamically. When enabled, it will repor t any appropriate and
previously unrepor ted events.
■ You can specify the syslog ser ver’s address either in dotted decimal format or as a DNS name up to 63
characters.
■ You can specify the UNIX syslog Facility to use by selecting the Facility pop-up.
■ Erase the log by selecting DUMP WAN LOG
Logging Configuration
WAN Event Log Options
Log Boot and Errors: Yes
Log Line Specific: Yes
Log Connections: Yes
Log PPP, DHCP, CNA: Yes
Log IP: Yes
Syslog Parameters
Syslog Enabled: No
Hostname or IP Address:
Facility... Local 0