Ip setup, Filter sets, Ip address serving – Netopia Firmware 4000-Series User Manual
Page 54: Network address translation (nat), Ip setup -36, Filter sets -36, Ip address ser ving -36, Network address translation (nat) -36
2-36 Firmware User Guide
The System Configuration menu screen appears:
IP Setup
These screens allow you to configure your network’s use of the IP networking protocol.
■
Details are given in
.
Filter Sets
These screens allow you to configure security on your network by means of filter sets and a basic firewall.
■
Details are given in
IP Address Serving
These screens allow you to configure IP address ser ving on your network by means of DHCP, WANIP, and BootP.
■
Details are given in
“IP Address Ser ving” on page 6-17
.
Network Address Translation (NAT)
These screens allow you to configure the Multiple Network Address Translation (MultiNAT) features.
■
Details are given in
“Multiple Network Address Translation” on page 3-1
System Configuration
IP Setup...
Filter Sets...
IP Address Serving...
Network Address Translation (NAT)...
Date and Time...
Console Configuration...
SNMP (Simple Network Management Protocol)...
Security...
Upgrade Feature Set...
Change Device to a Bridge...
Logging...
Use this screen if you want options beyond Easy Setup.