Netopia Firmware 4000-Series - Manual (Page 89)

Multiple Network Address Translation 3-23
IP Parameters (WAN Default Profile)
The Netopia Firmware Version 5.4 using RFC 1483 suppor ts a WAN default profile that permits several
parameters to be configured without an explicitly configured Connection Profile.
The procedure is similar to the procedure to bind map lists and ser ver lists to a Connection Profile.
From the Main Menu go to the WAN Configuration screen, then the Default Profile screen. Select IP Parameters
and press Return.
The IP Parameters (Default Profile) screen appears.
■ Toggle Address Translation Enabled to Yes.
Main
Menu
WAN
Configuration
IP Parameters WAN Default
Profile
IP Parameters (Default Profile)
Address Translation Enabled: Yes
NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers
Filter Set (Firewall)...
Remove Filter Set
Receive RIP: Both
Return/Enter to select <among/between> ...