Netopia Firmware 4000-Series - Manual (Page 78)

3-12 Firmware User Guide
mapping and press Return.
If none of your preconfigured ranges are suitable for this mapping, you can select <<NEW RANGE>> and
create a new range. If you choose <<NEW RANGE>>, the Add NAT Public Range screen displays and you
can create a new public range to be used by this map. See
Add NAT Public Range on page 3-9 .
■ The Add NAT Map screen now displays the range you have assigned.
■ Select ADD NAT MAP and press Return. Your mapping is added to your map list.
Add NAT Map ("my_map")
First Private Address: 192.168.1.1
Last Private Address: 192.168.1.254
Use NAT Public Range... my_first_range
Public Range Type is: pat
Public Range Start Address is: 206.1.1.6
ADD NAT MAP CANCEL