Changing a circuit, Changing a circuit -21 – Netopia Firmware 4000-Series User Manual
Page 39
WAN and System Configuration 2-21
Choosing Show/Change Circuit (or Delete Circuit) displays a pop-up menu that allows you to select the circuit
to be modified or deleted.
Changing a circuit
If you want to make any changes to the circuit you select, you make them in the Change Circuit screen.
■
Circuit Name allows you to associate a one- to four teen-character name with the circuit. The default circuit
name is “Circuit <n>”, where <n> is some number between one and eight corresponding to the circuit’s
position in the list of up to eight circuits.
ATM Circuits Configuration
+--Circuit Name----VPI/VCI--+
+---------------------------+
Show/Change Circuit... | Circuit 1 8/35 |
Add Circuit... | Voice Circuit 0/0 |
Delete Circuit... | |
| |
| |
| |
| |
| |
+---------------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
Change Circuit
Circuit Name: Circuit 1
Circuit Enabled: +---------+
+---------+
Traffic Type... | Voice |
| Data |
Circuit VPI (0-255): +---------+
Circuit VCI (0-65535): 38
Connection Profile is Easy Setup Profile