Netopia Firmware 4000-Series - Manual (Page 187)

IP Setup 6-35
By default, Multicast For warding is tuned off (None). You enable the router to transmit multicast data by
selecting Tx. from the pull-down menu.
If you enable Multicast For warding, you will see a new option IGMP Version. This lets you choose V1 or V2. If
you know you will be communicating with other hosts that are limited to V1, select V1; other wise, allow the
default V2.
Navigate to the IP Profile Parameters screen.
IP
System Configuration
Main
Menu Setup
IP Setup
Ethernet IP Address: 192.168.1.1
Ethernet Subnet Mask: 255.255.255.0
Define Additional Subnets...
Default IP Gateway: 0.0.0.0
Backup IP Gateway: 0.0.0.0
Primary Domain Name Server: 0.0.0.0
Secondary Domain Name Server: 0.0.0.0
Domain Name:
Receive RIP... Both
Transmit RIP... +----------------+
Multicast Forwarding... +----------------+
IGMP Version... | None |
| Tx. |
+----------------+
Static Routes... IP Address Serving...
Add/Display/Change
WAN Configuration
Main
Menu Connection Profile