Netopia Firmware 4000-Series - Manual (Page 204)

7-16 Firmware User Guide
Backup Management/Statistics
If backup is enabled, the Statistics & Logs menu offers a Backup Management/Statistics option.
To view Backup Management/Statistics, from the Main Menu select Statistics & Logs then
Backup Management/Statistics and press Return.
The Backup Management/Statistics screen appears.
■ Current Gateway is a display-only field that shows which por t is currently in operation.
■ Backup State is a display-only field that shows the current state of Backup or Recover y.
■ Reason is a display-only field that shows the cause for the current state of Backup or Recover y.
■ Time Since Detection is a display-only field that is only visible if backup or recover y is in progress. It
displays the elapsed time since detection of either primar y WAN line failure or re-establishment of the
connection.
■ Switchover Time is a display-only field that is only visible if backup or recover y is in progress. It displays
the time until either automatic Backup or Recover y.
■ The FORCE BACKUP/FORCE RECOVERY option is a selectable option that, depending on the current state
of backup, will force the switching of por ts. If you are currently in backup mode, the option will be FORCE
RECOVERY. If you are currently in normal WAN link mode, the option will be FORCE BACKUP. Selecting
Backup Management/
Statistics & Logs
Main
Menu Statistics
Backup Management/Statistics
Current Gateway: Primary
Backup State: Primary Port Failure in Progress
Reason: Loss of Layer 1
Time Since Detection: 0:14
Switchover Time: 1:00
FORCE BACKUP