Netopia Firmware 4000-Series - Manual (Page 195)

Line Backup 7-7
Connection Profiles
The line backup feature allows you to configure a complete Connection Profile for the backup por t, just as you
do for your primar y WAN connection. In this way profiles are associated with a par ticular inter face. The profile
should reflect the por t it is associated with. It should have switched characteristics for the backup por t.
For instructions on creating a Connection Profile see “Creating a New Connection Profile” on page 2-24 .
To associate this Connection Profile with your backup por t inter face, choose Backup from the Inter face Por t
pop-up menu and press Return.
If you choose Backup, Telco Options becomes visible. The Telco Options screen allows you to set the
parameters for the modem connection.
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: Yes
Data Link Encapsulation... PPTP
Data Link Options...
IP Enabled: Yes
IP Profile Parameters...
+----------------+
+----------------+
Interface Group... | Primary |
Telco Options... | Backup |
| Any Port |
+----------------+
COMMIT CANCEL
Return/Enter to discard changes you have made. Profile will not be added.
Configure a new Conn. Profile. Finished? ADD or CANCEL to exit.