Netopia Firmware 4000-Series - Manual (Page 286)

11-12 Firmware User Guide
3. Select CANCEL to exit without uploading the file, or select CONTINUE to upload the file.
If you choose CONTINUE, you will have ten seconds to use your terminal emulation software to initiate an
XMODEM transfer of the configuration file. If you fail to initiate the transfer in that time, the dialog box will
disappear and the terminal emulation software will inform you of the transfer’s failure. You can then tr y
again.
Restarting the System
You can restar t the system by selecting the Restart System item in the Utilities & Diagnostics screen.
You must restar t the system whenever you reconfigure the Router and want the new parameter values to take
effect. Under cer tain circumstances, restar ting the system may also clear up system or network malfunctions.
Some configuration processes automatically restar t the system to apply the changes you have made.
T1 Line Statistics and Diagnostics
For T1 models the Utilities and Diagnostics menu includes an option for displaying T1 line statistics.
You access the Utilities and Diagnostics menu from the Main Menu.
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| Are you sure you want to save your current Netopia configuration? |
| If so, when you hit Return/Enter on the CONTINUE button, you will |
| have 10 seconds to begin the transfer from your terminal program. |
| |
| CANCEL CONTINUE |
| |
| |
+--------------------------------------------------------------------+
T1 Line Statistics/
Utilities & Diagnostics
Main
Menu Diagnostics