National Instruments PCI-6023E - Manual (Page 129)

Index
PCI-6023E/6024E/6025E User Manual I-6 © National Instruments Corporation
PFIs (programmable function inputs)
common questions, C-4 to C-5
signal routing, 3-7 to 3-8
timing connections, 4-31 to 4-32
PGIA (programmable gain
instrumentation amplifier)
analog input modes, 4-10 to 4-11
differential connections
ground-referenced signal sources
(figure), 4-14
nonreferenced or floating signal
sources, 4-15 to 4-16
single-ended connections
floating signal sources (figure), 4-18
ground-referenced signal sources
(figure), 4-19
physical specifications, A-9
pin assignments
PCI-6023E/6024E (figure), 4-2
PCI-6025E (figure), 4-3
Port C pin assignments
description, 4-23
signal assignments (table), 4-23
posttriggered acquisition (figure), 4-32
power connections, 4-30
power requirement specifications, A-9
power-up state, digital I/O, 4-24 to 4-25
pretriggered acquisition (figure), 4-33
programmable function inputs (PFIs). See
PFIs (programmable function inputs).
programmable gain instrumentation amplifier.
See PGIA (programmable gain
instrumentation amplifier).
Q
questions and answers, C-1 to C-5
analog input and output, C-2 to C-3
general information, C-1
installation and configuration, C-2
timing and digital I/O, C-3 to C-5
R
RD* signal
description (table), 4-26
mode 1 input timing (figure), 4-27
mode 2 bidirectional timing (figure), 4-29
referenced single-ended input (RSE). See RSE
(referenced single-ended) mode.
register-level programming, 1-5
requirements for getting started, 1-2
RSE (referenced single-ended) mode
configuration, 4-10
description (table), 3-2
recommended configuration
(figure), 4-12
single-ended connections for floating
signal sources, 4-18
RTSI bus signal connection (figure), 3-9
RTSI clocks, 3-9
RTSI trigger lines
overview, 3-8
signal connection (figure), 3-9
specifications, A-9
S
sampling rate, C-1
SCANCLK signal
DAQ timing connections, 4-33
description (table), 4-5
signal summary (table), 4-7
scanning, multichannel, 3-4 to 3-5
settling time, in multichannel scanning, 3-5
signal connections
analog input, 4-8 to 4-19
common-mode signal rejection
considerations, 4-19
differential connection
considerations, 4-13 to 4-16
input modes, 4-9 to 4-11
single-ended connection
considerations, 4-17 to 4-18
PCI.book Page 6 Wednesday, September 16, 1998 9:09 AM