National Instruments PCI-6023E - Manual (Page 17)

Chapter 1 Introduction
© National Instruments Corporation 1-5 PCI-6023E/6024E/6025E User Manual
Figure 1-1. The Relationship between the Programming Environment,
NI-DAQ, and Your Hardware
Register-Level Programming
The final option for programming any National Instruments DAQ
hardware is to write register-level software. Writing register-level
programming software can be very time-consuming and inefficient,
and is not recommended for most users.
Even if you are an experienced register-level programmer, using NI-DAQ
or application software to program your National Instruments DAQ
hardware is easier than, and as flexible as, register-level programming,
and can save weeks of development time.
ComponentWorks,
LabVIEW,
LabWindows/CVI, or
VirtualBench
Conventional
Programming Environment
NI-DAQ
Driver Software
DAQ or
SCXI Hardware
Personal
Computer or
Workstation
PCI.book Page 5 Wednesday, September 16, 1998 9:09 AM