Nortel Networks SL-100 - Manual (Page 15)

15
Your telephone’s controls
Your telephone’s controls
This section describes the features on the M3905 ACD Meridian Digital telephone.
Programmable Line/Feature Keys (self-labeled)
In addition to secondary extension number(s), you can have features assigned to the
Feature Keys on your telephone. An LCD indicator shows the status of the feature
assigned to each key. See “Agent features” on page 35. Also see “Call Center
supervisor features” on page 44.
Line Key
A steady LCD indicator appearing beside a
Line (DN) Key means that the feature or line
is active. A flashing LCD indicator means
the line is on hold or the feature is being
programmed.
Auto Dial Key
An Auto Dial Key lets you dedicate a
Line/Feature Key to a specific number.
Inspect Key
The Inspect Key allows you to display
information associated with the Line/Feature
Keys. The display information on a second
caller does not interfere with the current call
in progress.
Note: If the Auto Display feature is enabled,
Calling Line Identification is displayed for a
second incoming call.
Options Key
The Options Key is a dedicated
Programmable Line/Feature Key. The
Options Key is located at the top-left side of
the upper display area. Press the
Options
Key to access the Options Menu.
Press the Options Key to make adjustments
to your telephone’s volume and display
contrast, as well as other feature settings.
x2494
Sales
Display
Options
Options