Nortel Networks SL-100 - Manual (Page 72)

72
Call features
Busy Override
The Busy Override feature allows you to gain access to a busy station by
pressing the
ExeBusyOvd Key.
To activate Busy Override
after receiving a busy tone:
1. Press the ExeBusyOvd Key.
Note 1: If Busy Override is valid for
the station being called, you hear
silence.
Note 2: If Busy Override is not valid
for the station being called, you hear a
reorder tone.
2. The connected parties hear a
Busy Override warning tone.
After this tone, a three-way call
connection is established.
or
3. You can disconnect the third
party from the called party by
pressing the
ExeBusyOvd Key
again.
or
/
You can give a message to the
called party and then press the
Goodbye Key to release from the
call .
Note: If the called party has Busy
Override with Call Waiting options,
your call is call waited when active
with Busy Override.
Make an Announcement over the Call Page
Call Page allows you to make an announcement over the page system. To make
a page call, dial the page access code.
Note: When attendant consoles use the Page Key, it overrides the telephones.
ExeBusyOvd
ExeBusyOvd