Nortel Networks SL-100 - Manual (Page 63)

63
While on an active call
If the transferred call is not
answered, your telephone rings:
1. Press a DN Key. You connect back to
the original caller.
2. Press the Transfer Key and repeat the
transfer (to a different DN), if desired.
Note: Check with your system administra-
tor about the length of your recall timer.
Call Park
Call Park allows a call to be held temporarily, then retrieved from any other DN.
You can park an incoming call, then page the called party. When you use Call Park
you do not tie up a line. Your office may have a System Park DN where most calls
get automatically parked.
To Park a call on your own DN:
1. While on an active call, press the
Park Key.
The screen displays PARK on the first line.
On the next or bottom line, the screen
displays CALL PARKED.
/
This call is automatically parked into the
system.
To Park a call on a DN other than
your own DN:
1. Press the DirectPark programmable
line/feature Key.
2. Dial the DN where you want the call
parked, or press the Octothorpe (#)
Key twice to park the call on the
System Park extension.
2498
Trans
Park
DirectPark