Raritan Engineering Command Center CC-SG - Manual (Page 100)

84 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
7. Type a Target Username that the application will use as a Start-up parameter. If a target
name is supplied, then only a password is required when accessing a target.
8. Select the associated category and element from the Port Associations table.
9. Click OK to configure the Generic port or Cancel to exit with configuring. A Port
Configured Successfully message confirms that port has been created.
10. Repeat steps 1 through 9 to configure other Generic ports.
Configure an Outlet Port
Outlet ports can be configured for PowerStrip devices and IPMI servers.
1. Click on the Devices tab and select a PowerStrip device from the Devices tree.
2. On the Devices menu, click Port Manager, and then click Configure Ports. The Configure
Ports screen appears.
Figure 104 Configure Ports Screen for Powerstrip Device
Figure 105 Configure Ports Screen for IPMI Server