Raritan Engineering Command Center CC-SG - Manual (Page 103)

C HAPTER 6: C ONFIGURING P ORTS AND P ORT G ROUPS 87
Bulk Copy
To save time, use the Bulk Copy command to duplicate Port names or associations to other ports.
1. Click on the Ports tab and select a port whose data you want to copy to another.
2. On the Ports menu, click Bulk Copy. The Bulk Copy screen appears.
Figure 108 Bulk Copy Screen
3. In the All Ports list select the port name(s) that will be adopting the profile of the port listed
in the Port Name field above.
4. Click > to move a port name to the Selected Ports list.
5. To remove a port name from the Selected Ports list, click on the name and click < to move it
back to the All Ports list.
6. Click OK to copy port properties or Cancel to exit without copying. A Port Copied
Successfully message confirms that the port profile has been copied.
7. Repeat steps 1 through 6 to make other bulk copies of port properties.