Raritan Engineering Command Center CC-SG - Manual (Page 118)

102 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
Apply (Edit) User Group Policies
Groups can be assigned policies, or permissions, that allow them to view and/or control devices
and ports. Depending on which policies are assigned to them, groups might have: No Rights,
Some Rights, Control Rights, or Full Administration Rights. Policies can be set up using Policy
Manager commands, as described in the section Policy Manager, later in this chapter.
1. Click on the Users tab and select a group.
2. On the User menu, click Edit User Group Policies. The Edit User Group Policies screen
appears.
Figure 127 Edit User Group Policies Screen
3. Click on a line item in the Policies list (under the All Policies panel) that you wish to assign
to the group. Scroll up or down to view all policies in this list. Click on the Day(s) check
boxes to select which days of the week the policy should be assigned.
4. Click Add to add the policy to the Selected Policies panel and assign it to the group.
5. To remove an assigned policy from the Selected Policies list, select the policy line item and
click Delete.
6. Click OK to add the policy or policies to the group or Cancel to exit without editing. A User
Group Policies Updated Successfully message confirms that policies have been updated.
7. Repeat steps 1 through 6 to edit other groups’ policies.