Raritan Engineering Command Center CC-SG - Manual (Page 109)

C HAPTER 7: A DDING U SERS AND U SER G ROUPS 93
Chapter 7: Adding Users and User Groups
User Manager commands are listed in the Users menu and allow you to define the CC-SG user
list and assign user privileges for performing various functions. CC-SG maintains a centralized
user access list. Only an Administrator (a user with Administrator privileges) can manage user
accounts.
Important! Many of the menu bar commands can be accessed by right-clicking
on a User icon in the Selection tree (on the left side of your CC-SG window)
and choosing a command from the shortcut menu that appears.
Add User
1. Right-click on a user group in the Users tree and select Add User. The Add User screen
appears.
Figure 116 Add User Screen
2. Type the user’s name in the Username field (4-16 characters, alphanumeric characters or
underscores, no spaces for locally authenticated users and no length restriction for users
authenticated remotely).
3. Check the Remote Authentication check box only if the user should be authenticated by
TACACS+, Active Directory, RADIUS, or LDAP (please see Chapter 9: Configuring
Remote Authentication for additional information).
Note: Checking the Remote Authentication box implies that a remote server is being used for
authentication. If so, a local password is not required.
4. For local CC-SG authentication only, type the new password into the Password field (6-16
characters, alphanumeric characters and underscores, no spaces).
5. Re-type password in Retype Password field.
6. The dial back number in the Dial Back Number field is configured under the Modem tab in
Configuration Manager–see Modem Configuration in Chapter 12: Advanced
Administration.
7. Check the Login Enabled check box to authenticate against the system (if not, user cannot
enter the system).