Add device, Figure 52 add device selection screen, Figure 53 add device screen for powerstrip – Raritan Engineering Command Center CC-SG User Manual
Page 67: Add device in, Section add device, Ee add device
C
HAPTER
5:
ADDING DEVICES AND DEVICE
G
ROUPS
51
Add Device
Use this command to add a new device to the system.
1. Click on the Devices tab.
2. On the Devices menu, click Device Manager, and then click Add Device. The Add Device
selection screen appears.
Figure 52 Add Device Selection Screen
3. Click on the Device Type drop-down arrow and select a type of device from the list.
4. Click Next to proceed. The Add Device description screen appears. Depending on the type of
device you selected, you will see a device in the Dominion family (KSX, KX, KX101, or SX),
an IP-Reach, a Paragon II System Controller, an Intelligent Platform Management Interface
(IPMI) v1.5 device, a PowerStrip, a Generic device (for example, a hub, Windows server, or
Cisco router) or an iLO/RILOE screen.
Figure 53 Add Device Screen for PowerStrip