Raritan Engineering Command Center CC-SG - Manual (Page 134)

118 C OMMAND C ENTER S ECURE G ATEWAY A DMINISTRATOR G UIDE
General Settings on CC-SG
1. Type the IP Address/Hostname of the Active Directory server. For hostname rules, see
Terminology/Acronyms in Chapter 1: Introduction.
Figure 143 Specifying General Values for Active Directory Server
2. Check Anonymous Bind if you want to connect to the Active Directory server without
specifying a username and password. If checking this option, ensure your Active Directory
server allows anonymous queries.
Note: By default, Windows 2003 does NOT allow anonymous queries. Windows 2000 servers do
allow certain anonymous operations, whose query results are based on the permissions of each
object.
3. If not using anonymous binding, type a User name. The user name needs to be a valid user
entry in the Active Directory directory structure and should have permissions to execute
search queries. The user name can be in one of the following three forms:
• cn=Administrator,cn=Users,dc=raritan,dc=com
• [email protected]
• Administrator
Note: If using SASL to securely connect to Active Directory, use the third form (Administrator)
for the user name.
4. Enter and confirm the Password for the user name if not using anonymous binding.
5. Optionally, click Test Connection to test the connection to the Active Directory server using
the given parameters. You should receive a confirmation of a successful connection. If not,
review the settings carefully for errors and try again.
6. Click Next to continue.